|
Post by pinstryper on Oct 30, 2016 17:18:22 GMT -5
Why would they have to cut it off?
|
|
|
Post by pinstryper on Oct 30, 2016 17:19:05 GMT -5
Man built it man can take it apart
|
|
|
Post by bdmontero on Oct 30, 2016 17:42:30 GMT -5
I guess its siezed?
|
|
|
Post by pinstryper on Oct 30, 2016 18:22:58 GMT -5
jeez, spray some penatrent? Put the nut on the end. go burn one, come back and whack nut solid w hammer remove nut tap on bolt end with drift till it falls out.
|
|
|
Post by pinstryper on Oct 30, 2016 18:23:46 GMT -5
these guys do this for a living?
|
|
|
Post by bdmontero on Oct 30, 2016 19:40:28 GMT -5
I think so lol.
|
|
|
Post by pinstryper on Oct 30, 2016 19:50:04 GMT -5
did they get it done?
|
|
|
IFS lift
Oct 30, 2016 20:25:17 GMT -5
via mobile
Post by dirk on Oct 30, 2016 20:25:17 GMT -5
I got all new hardware with my upper and lower control arms, all new nuts etc. The rear bushing is where the torsion bar mounts I believe. The control arm assembly and rear bushing are 2 separate parts. Still available. I still have my lower control arms left to do. The dealership ran out of time since it is my daily driver too. I'd grab mine and take pictures of it all apart, but it's in back of the garage at my new place (yes finally have a garage, my stuff went in first, then filled up with everything else) so can't get to it till I get more stuff unpacked lol.
|
|
|
Post by bdmontero on Oct 30, 2016 20:34:56 GMT -5
This is what they can't get out on the driver side. Passenger side slid right out.
|
|
|
Post by bdmontero on Oct 30, 2016 20:40:25 GMT -5
No they are working on the axle now to drop the whole thing and use a 20 lb sledge on it probably. 😧😧
|
|
|
Post by bdmontero on Oct 30, 2016 21:03:26 GMT -5
Got her out. Screaming and yelling was involved but she came out of there. Lol
|
|
|
Post by bdmontero on Oct 30, 2016 21:16:37 GMT -5
Now their getting passenger side axle out of housing. I assume its a c clip?
|
|
|
Post by bdmontero on Oct 30, 2016 21:17:01 GMT -5
|
|
|
Post by pinstryper on Oct 30, 2016 21:24:07 GMT -5
they both just pull out of the 3rd member
|
|
|
Post by pinstryper on Oct 30, 2016 21:25:16 GMT -5
why are they removing 3rd member?
|
|