|
Post by bubbakrip on Nov 1, 2016 17:43:26 GMT -5
I own 2001 Montero Sport xls 4x4 3.0 . The tensioner pulley near the power steering pump , one of the tabs broke off of the casting . I need to replace this and i only have a short window to find and buy this because I am out of the country and my Wife is in the states and can bring it to me . Please help , the sooner the better . In the mean time i will be searching this site for more info . On the DIY Belt write up , on number 4 where it shows the bolt , well the casting tab that holds it there is what broke . here is a link to that write up also . www.monterosportonline.net/?page_id=682
|
|
|
Post by pinstryper on Nov 1, 2016 20:23:36 GMT -5
your talking about the adjuster casting OR one of the 4 holding the adjuster rail?
|
|
|
Post by bubbakrip on Nov 1, 2016 21:29:19 GMT -5
The adjuster casting . the adjuster with 4 bolts is fine , its what it connects to that broke
|
|
|
Post by bubbakrip on Nov 1, 2016 21:49:40 GMT -5
|
|
|
Post by bdmontero on Nov 1, 2016 22:19:29 GMT -5
Oh crap......😨
|
|
|
Post by pinstryper on Nov 2, 2016 8:22:26 GMT -5
if it is what I think it is then do this, find a piece of angle iron 1x1 inch. Cut a piece about 1.5 inch off weld it to the end of the adjuster and drill a whole in it. take a grinder and open it up and slide adjuster bolt in. I don't have a completed piece but my Description should put a mechanic on the right track.
|
|
|
Post by pinstryper on Nov 3, 2016 14:54:21 GMT -5
step one... they wanted $850+ to replace cover or $400 to have it Heli-Arc welded. I said $200 2 days and it was fun to do.
|
|