|
Post by MitsuMontySp99 on Nov 8, 2010 10:24:45 GMT -5
I lost the 2 pin Ford socket that I modified for removing and re-installing my hubs.
I need that MB990954-01 lock nut wrench or any Ford/GM already altered equivalent part to repack and reseal my bearings.
Thanks a lot!
|
|
|
Post by bdmontero on Nov 8, 2010 15:26:27 GMT -5
Ill sell ya one for 34.00 with free shipping.
|
|
|
Post by MitsuMontySp99 on Nov 8, 2010 15:57:41 GMT -5
What about 20.00, I'm in dire financial situation that's why I'm fixing the truck myself.
|
|
|
Post by bdmontero on Nov 9, 2010 12:57:06 GMT -5
Well in that case go to oriellys and buy a 3/4 ton gm 6 prong socket and grind off four prongs so that only two two parallel prongs remain.
|
|
|
Post by MitsuMontySp99 on Nov 16, 2010 9:20:57 GMT -5
Thanks a lot for granting my wish, I received the part yesterday! Shipping was fast...Hopefully if the weather cooperates this weekend, I'll be working on my MS front hubs.
|
|
|
Post by bdmontero on Nov 16, 2010 15:35:31 GMT -5
Just remember, torque to 120 ft. Lbs. Back off to zero. Retorque to 18-20 ft lbs. Align washer to threaded holes and put brass screws back in.
|
|