|
Post by pinstryper on Nov 11, 2015 16:42:08 GMT -5
This will be easier but 463 worth the squeeze?
|
|
|
Post by pinstryper on Nov 11, 2015 16:50:15 GMT -5
I know where you can get a complete white/gold leather for $400 those flares would be a pai to ship
|
|
|
Post by dirk on Nov 11, 2015 19:16:07 GMT -5
The Sudan beige (gold part of the 2 tone on mine) cost me about 30.00 if I remember correctly to have a brand new fender, that came with some clips, shipped to my house from a Mitsubishi parts warehouse. Good part of it is they come from the factory pre painted.
|
|
|
Post by ES_97Sport on Nov 11, 2015 19:58:49 GMT -5
The Sudan beige (gold part of the 2 tone on mine) cost me about 30.00 if I remember correctly to have a brand new fender, that came with some clips, shipped to my house from a Mitsubishi parts warehouse. Good part of it is they come from the factory pre painted. Not any more. I just bought a complete set for the big Sport from the dealership. They USED to come color matched but now they come in a neutral color. That info is directly from Mitsu out in CA - not the dealership. There are apparently a few color coded ones still floating around. I ended up with one champagne color flare. So, if you get one that matches your vehicle, its a coincidence. Might want to head over to the 7-Eleven and pick up a couple lottery tickets. Sucks. I have the perl gold on black and nobody here seems to be able to mix it so it matches the body. Edward
|
|
|
Post by dirk on Nov 11, 2015 23:29:55 GMT -5
that sucks, I needed to order another one for other side, there is a small hidden crack (not noticeable except it is where it screws to bumper section of flare), possible 1 rear one because it is not clipped in and think one of the clip holders on the flare is broken. and need 3 new color rubber seals. I honestly considered changing the lower section of my 2 tone to black. Still up in the air on that, also would love to change my interior color too LOL. Tan + kids = stains
|
|
|
Post by bdmontero on Nov 12, 2015 8:19:54 GMT -5
And the congregation said "AMEN" ^^^^^^ LOL
Sent from my SM-N900V using proboards
|
|
|
Post by ES_97Sport on Nov 12, 2015 16:13:36 GMT -5
that sucks, I needed to order another one for other side, there is a small hidden crack (not noticeable except it is where it screws to bumper section of flare), possible 1 rear one because it is not clipped in and think one of the clip holders on the flare is broken. and need 3 new color rubber seals. I honestly considered changing the lower section of my 2 tone to black. Still up in the air on that, also would love to change my interior color too LOL. Tan + kids = stains They sell the rubber seal that goes between the flair and body separate. That I didn't know until a couple months ago. Unfortunately, its not color coded either. Sigh. Oh, ouch! Yea, been there. At least the tan leather is easy to clean. Guy was downstairs last week with a full size Blazer. He had the gold and black two tone redone in gold and black Rhino Liner. I'm thinking of redoing my '99 before things get crazy and having the bottom bronze redone in the same color Rhino Liner. I think the black would look good, too, but I already have two black Sports. Getting tired of black! Edward
|
|
|
Post by pinstryper on Nov 12, 2015 17:32:09 GMT -5
Being a rhino liner type guy, I think the gold would be neet, heavy thought
|
|
|
Post by ES_97Sport on Nov 12, 2015 19:38:46 GMT -5
Being a rhino liner type guy, I think the gold would be neet, heavy thought That Chevy was the first vehicle I've ever seen that was entirely Rhino Lined. The funny thing is, until you got within about 15-20 ft, you couldn't TELL it was Rhino Lined. Looked like a semi-gloss primer job. I should have took a couple pics. Had the bumper, carrier, the whole works. Sitting on a 4-6" lift w/35"s. Very sharp! It had an extraordinarily stupid nerf/skid hybrid thing going on, but otherwise very cool. Anyway, something I'd seriously consider doing myself. Edward
|
|
|
Post by pinstryper on Nov 12, 2015 21:42:07 GMT -5
There' is a raptor at the local 4x4 shop done in bedliner 5k worth, looks pretty cool but not for me.
|
|
|
Post by ES_97Sport on Nov 20, 2015 17:51:27 GMT -5
The Blazer was back yesterday. Edward
|
|
|
Post by pinstryper on Nov 20, 2015 19:28:52 GMT -5
That's bedliner? Thought it was gold?
from beyond the pale...
|
|
|
Post by pinstryper on Nov 20, 2015 19:45:19 GMT -5
So a 2'' body lift enabled you to run these with no issues? What was done suspension wise? And yes I am aware this was an old post. I'm just going crazy waiting on the wheels to test fit.
from beyond the pale...
|
|
|
Post by pinstryper on Nov 23, 2015 9:54:35 GMT -5
Got the 15x7 yesterday. And that is the flange off the 4.2 pumpkin, the 4.9 had 8 holes
|
|
|
Post by ES_97Sport on Nov 23, 2015 18:19:18 GMT -5
That's bedliner? Thought it was gold? Yep. Both tones and the top. The vehicle was originally that autumn gold with the black bottom. Edward
|
|