|
|
Post by pinstryper on Dec 20, 2015 16:53:37 GMT -5
Had the local parts remover pull it, and boy its heavier than normal 4.90.  2nd post but they are getting all over the map so I'm going to do my part to be succint. |
|
|
|
Post by pinstryper on Dec 22, 2015 19:01:22 GMT -5
Got a radio and alarm in yesterday, and removed the antenna motor today to get the 4 pieces of old mast cable out..
Now to get the adapter and Y cable and see if its worth it.
Sorry no pics
|
|
|
|
Post by cwic on Dec 22, 2015 22:02:40 GMT -5
I want one, although I think my trans issues are actually due to my 3k stall converter heating the fluid. Want to rebuild tranny and make it a shifter.
Clay
|
|
|
|
Post by ES_97Sport on Dec 23, 2015 17:20:39 GMT -5
I want one, although I think my trans issues are actually due to my 3k stall converter heating the fluid. Want to rebuild tranny and make it a shifter. Clay You know where to get higher (or different than OEM) stall Mitsubishi torque converters? Edward |
|
|
|
Post by pinstryper on Dec 24, 2015 12:04:16 GMT -5
Probably get one built, check your local drag racers or national dragster.
|
|
|
|
Post by ES_97Sport on Dec 24, 2015 14:00:44 GMT -5
Probably get one built, check your local drag racers or national dragster. There used to be a shop here in Denver that did a torque converter for off road use. They were actually featured in one of the off road magazines around '00. The issues I had disappeared and I never was able to find the company. They did a significantly lower stall converter that was supposed to be much better for trail use. I guess I'll have to do a little research and see what I can come up with. Edward |
|
|
|
Post by cwic on Jan 2, 2016 11:33:57 GMT -5
I got mine done at IPT (import performance transmissions)
|
|
|
|
Post by palmsprings on May 25, 2016 11:14:20 GMT -5
Got a radio and alarm in yesterday, and removed the antenna motor today to get the 4 pieces of old mast cable out.. Now to get the adapter and Y cable and see if its worth it. Sorry no pics Where is your Y located? Do you have an glass imbedded antenna in your left rear glass? |
|
|
|
Post by pinstryper on May 25, 2016 12:02:51 GMT -5
It will be located directly behind the radio that it's plugged into
I'll worry about that when I replace the carpet while I do the lift kit
|
|
|
|
Post by pinstryper on May 25, 2016 12:03:20 GMT -5
I had the antenna and glass put in 6 months ago
|
|
