|
Post by redraif on Jun 7, 2016 16:20:27 GMT -5
|
|
|
Post by jkdv8 on Jun 7, 2016 17:15:18 GMT -5
Are they working Also, to whom it may concern, the second link you mentioned about testing the ignition is what is described in the shop manual.
|
|
|
Post by redraif on Jun 7, 2016 17:17:08 GMT -5
Well the truck had no codes with a bad precat with the non fouler in place... it still did not code with the cat completely cut off
1/17/16: 253,628 installed... Passed emissions @ 254,720 with no code...
|
|
|
Post by redraif on Jun 7, 2016 21:18:07 GMT -5
Ok here is a better shot of them installed. The shorter with gasket (42009) was left intact. I drilled out the tapered one (42002) and screwed the O2 into it. Then screwed that into 42009. The whole assembly was installed in the post (after) pre-cat O2 hole.
|
|