|
lift?
Feb 25, 2004 12:48:14 GMT -5
Post by boardmonty on Feb 25, 2004 12:48:14 GMT -5
i am going to lift my ms and i was wondering whats the best way and product to go with. im sure that everyone will say get the two inches out of the torsion bars which im gonna do but what is the best product to go with to get the other two?
|
|
|
lift?
Feb 26, 2004 11:49:28 GMT -5
Post by 03MSKING on Feb 26, 2004 11:49:28 GMT -5
WHAT DO YOU MEAN WHEN YOU SAY "GET THE OTHER TWO"? ARE YOU EXPECTING A 4" LIFT? THE TORSION BARS SHOULD ONLY BE CRANKED TO 2" - 2 1/2". DEPENDING ON WHAT YEAR YOUR MS IS YOU CAN LIFT IT A COUPLE OF WAYS. IF IT IS 2000+ THEN THE OME (OLD MAN EMU) LIFT KIT IS PROBABLY YOUR BEST BET WITH 2 INCHES OF LIFT. IF YOUR MS IS 99 OR OLDER THEN YOU CAN USE 2" SHACKLES IN THE BACK. EVEN AIR LIFT IS AN OPTION.
|
|
|
lift?
Feb 26, 2004 11:52:58 GMT -5
Post by boardmonty on Feb 26, 2004 11:52:58 GMT -5
yeah i meant gettin two more inches for a four inch lift...i have a 00 montero and i had looked at the old man emu but i wanted to make sure theyre was nothing else....guess thats what ill go with....thanks
|
|
|
lift?
Feb 26, 2004 12:14:57 GMT -5
Post by 03MSKING on Feb 26, 2004 12:14:57 GMT -5
NO PROBLEM, MAKE SURE YOU GET THE SHOCK TO GO WITH IT BECAUSE THE STOCK SHOCKS WILL NOT BE LONG ENOUGH AFTER YOU LIFT IT. I PLAN ON GETTING THE TWO REAR COILS AND SHOCKS AND ALSO THE TWO FRONT SHOCKS. WILL COST AROUND $400.
|
|
|
lift?
Apr 23, 2004 10:23:36 GMT -5
Post by killkrazed on Apr 23, 2004 10:23:36 GMT -5
OMGOMGOMG I LIKE TOWRITE INALL CAPITALLLETTERS BECAUSE ITS SIMPLE! GOAHEAD AND TRYIT! WEEEEEEEEEEEEEE!
|
|
|
lift?
Jan 15, 2005 1:38:05 GMT -5
Post by mitsubishiL200 on Jan 15, 2005 1:38:05 GMT -5
I've never done this before- would it be easier to lower the rear or raise the front a couple of inches. I would like to level the truck out.
|
|
|
lift?
Jan 17, 2005 19:29:11 GMT -5
Post by brewster on Jan 17, 2005 19:29:11 GMT -5
Crank the torsion bars up in the front would be easiest.
|
|