JOEDEE
Newbie
Get, in there!
Posts: 10
|
Post by JOEDEE on May 4, 2004 10:21:01 GMT -5
How many splines are on the outer Axel of a 2000 ms, is it 26, if so AirForceEagle1 and I believe we may have found some Manual locking hubs that may work, for an early 90's late 80's Toyota. I have contacted every Hub maker I know off and none of them make manual lockers for a 2000+ ms, If anyone has any thought on this please lets discuss it. Is the Pajero, available with manual hubs if so, how do I get set? thanks
|
|
|
Post by matt00sport on May 4, 2004 11:45:58 GMT -5
I've got Superwinch huns on my 2000. Part #400543.
Matt
|
|
JOEDEE
Newbie
Get, in there!
Posts: 10
|
Post by JOEDEE on May 4, 2004 12:51:19 GMT -5
thanks Matt, I've checked the super winch site and the spline/bolt count is 28-6 does that sound right? I haven't looked at mine yet.
|
|
|
Post by matt00sport on May 4, 2004 13:58:28 GMT -5
Sounds right but I don't remember. All that matters is the part number above fits with no issues.
Matt
|
|
|
Post by AirForceEagle1 on May 5, 2004 11:23:11 GMT -5
Thanks Matt. I'm still trying to see if the 98 setup is like the '00, that way I can go manual as well. I've seen alot of charts that suggest a 26 spline is what we have, but then others say its 28. I'll probably count tomorrow just to make sure, but I really want to get an old set of toyota hubs for it(low budget), I just don't know what year to get them off of, do you?
|
|
|
Post by matt00sport on May 7, 2004 11:25:05 GMT -5
I don't know much about fitting Aisin (toyota) hubs to the montero sport. You may want to try the 4X4 wire Mitsu section as several folks with monteros have done this modification.
|
|
|
Post by AirForceEagle1 on May 8, 2004 1:08:33 GMT -5
Alright, I counted.. I have 28 splines, and so the part number that superwinch gave will more than likely fit at least my '98 'tero. As the 2000 goes, good luck, and we shall all find out about joedee's '00 as soon as we can. Thanks Joe..
|
|