|
Post by remembertofocus on Feb 26, 2004 1:54:47 GMT -5
can someone post pics of the torsion bar, and where the screw is, how, the direction etc. on how to lower the ms about 2 inches...maybe in the DIY or on this thread...yoshi has pics, but not very clear...i wanna know what way to turn the bolt...where, how ....clueless here
|
|
|
Post by cwic on Feb 26, 2004 22:03:35 GMT -5
u will have to remove the skidplate to get to the bolt. Then u back the nut off and turn the bolt the desired amount then tighten the nut back down I belive. Clay
|
|