|
|
Post by youdntknowme23 on Jun 23, 2005 15:42:59 GMT -5
whats up guys. question. I just bought a set of 20s with the 6x139.7 bolt pattern. what i did not think about before was about bore size. i called a wheel store around here and asked them about the situation, whether or not i could still use the wheels if bore sizes were different. they didnt give me a straight answer, so i figured id ask some experts. if the bore size of the wheels is smaller than the MS, is there anything i can do? adapter or something? or am i just screwed?
|
|
|
|
Post by jerseysport on Jun 25, 2005 14:07:05 GMT -5
what kind of wheels did you get? and why wont they fit did you buy them online and from where, shouldnt they take the wheels back if its an incorrect fit?
|
|
|
|
Post by cwic on Jun 28, 2005 16:10:16 GMT -5
if the bore size is 2 small there is nothing u can do to make it fit. I think it has to be 108mm
clay
|
|
mpls152
Junior Member
2000 Mitsubishi Montero Sport Limited - Black and Tan
Posts: 31
|
Post by mpls152 on Aug 16, 2005 14:58:19 GMT -5
108 mm is correct. if you look at one of my recent posts here, you'll see an example of wheels that fit. those come in black, hyper black and chrome.
|
|
|
|
Post by Joel_CA on Aug 16, 2005 16:49:57 GMT -5
If the lug nut lands on the wheel is tapered in, you can have the hub bored out at a machine shop- and use tapered lug nuts to hold the wheels centered (lugcetric). You may have to sign a waiver to release them of any responsibility.
Joel, CA
|
|
