Post by 20montero00 on Aug 15, 2005 16:25:15 GMT -5
Hey guys, I've been having some vibration on the front drivers side while braking. I took it apart today and found the drivers side caliper to be looser than the passenger side, even with the bolts as tight as can be. The only thing I can figure is that the holes on the braket that the studs slide into are worn. The bolts themselves dont appear to be worn as they have the same amount of play on both the drivers side and passenger side and they thread very tightly into the caliper itself. Does this make sense, or has anyone else had this problem? By the way I have a 2000 ms. Thanks.
Tim
Tim