Post by amatti73 on Jun 7, 2010 14:59:01 GMT -5
This is the first version foglamps.
Its second version foglamp
If interesting...
Technology disassembly lights.
We take out bounding lamp with holder and lamp H4. Must twisting two screw in the lamp turns.
Ideally - in the oven, and electricity is not important or gas. Warms the oven to 110-140 degrees.Less is impossible - is bad for all lights, it can twist! In preheated oven put a piece of plywood to put a spotlight on it, and not on the hot metal.Before you put the lamp in the oven, prepared to work 2 screwdrivers, gloves, trays (to hand in vain not to scorch).
Put lamp (at 120 - somewhere in 5 minutes).Time and commitment is determined by the sealant such as an awl - where castles headlights with the glass a lot in the production of extruded full-sealer, and then we'll see how well it starts leaking.
When melted sealant begins to separate glass from the lights, starting from the glass which is closer to the grille. If properly ( good) warmed sealant, glass quickly and easily separated from the lights is only the second catch with a screwdriver, plastic locks!
Disassembling the lights - not a difficult thing. Crap a lot and when you remove the sealant from glass and plastic headlights. This is already done by building dryer. Moreover, it is removed from the glass with a wide chisel and a knife, and from the grooves on the lamp-wide and not very screwdriver under the "-". And remove the sealant, I think necessarily, because then with aiming headlights when traveling more comfortable to shoot and put the glass. Yes, and for fixing lights (after all the work) is much more convenient - has filled the liquid sealant, coupled with a glass lamp, wrapped duct tape and put it to dry for a day (and at a temperature of 70-80 degrees - for 2-3 hours).Silicone sealants can not be used because after sticking them to windows already then do not break anything except to remove. In any case, the name of the desired sealant - it is clear-"DoneDeal" - firm and autoclavable "-name (number DD6870) tube 82г.For sale in almost all departments avtomalyarnyh in the market (price 6 dollars).
That naturals
Distant
Neighbor
is approximately 7-10 meters
I apologize for the quality of the photo is a phone. By the way today had a chance to compare with Tuaregs lenses VALEO. I will not boast, but I have and ticks in the Middle more extensive (left to right) and illuminated area more uniform, and my distant-2 trapezoid forming virtually one big at all apart from the competition! : O
However, the Tuareg - the light a little brighter - his reflectors inside the lens - chrome and glossy, but in HELLA - matt chrome ... And it affects!
That Thema with pictures and process technology
www.pajero4x4.ru:88/bbs/phpBB2/viewtopic.php?f=31&t=29927
its my foto album
fotki.yandex.ru/users/amatti73/?
Its second version foglamp
If interesting...
Technology disassembly lights.
We take out bounding lamp with holder and lamp H4. Must twisting two screw in the lamp turns.
Ideally - in the oven, and electricity is not important or gas. Warms the oven to 110-140 degrees.Less is impossible - is bad for all lights, it can twist! In preheated oven put a piece of plywood to put a spotlight on it, and not on the hot metal.Before you put the lamp in the oven, prepared to work 2 screwdrivers, gloves, trays (to hand in vain not to scorch).
Put lamp (at 120 - somewhere in 5 minutes).Time and commitment is determined by the sealant such as an awl - where castles headlights with the glass a lot in the production of extruded full-sealer, and then we'll see how well it starts leaking.
When melted sealant begins to separate glass from the lights, starting from the glass which is closer to the grille. If properly ( good) warmed sealant, glass quickly and easily separated from the lights is only the second catch with a screwdriver, plastic locks!
Disassembling the lights - not a difficult thing. Crap a lot and when you remove the sealant from glass and plastic headlights. This is already done by building dryer. Moreover, it is removed from the glass with a wide chisel and a knife, and from the grooves on the lamp-wide and not very screwdriver under the "-". And remove the sealant, I think necessarily, because then with aiming headlights when traveling more comfortable to shoot and put the glass. Yes, and for fixing lights (after all the work) is much more convenient - has filled the liquid sealant, coupled with a glass lamp, wrapped duct tape and put it to dry for a day (and at a temperature of 70-80 degrees - for 2-3 hours).Silicone sealants can not be used because after sticking them to windows already then do not break anything except to remove. In any case, the name of the desired sealant - it is clear-"DoneDeal" - firm and autoclavable "-name (number DD6870) tube 82г.For sale in almost all departments avtomalyarnyh in the market (price 6 dollars).
That naturals
Distant
Neighbor
is approximately 7-10 meters
I apologize for the quality of the photo is a phone. By the way today had a chance to compare with Tuaregs lenses VALEO. I will not boast, but I have and ticks in the Middle more extensive (left to right) and illuminated area more uniform, and my distant-2 trapezoid forming virtually one big at all apart from the competition! : O
However, the Tuareg - the light a little brighter - his reflectors inside the lens - chrome and glossy, but in HELLA - matt chrome ... And it affects!
That Thema with pictures and process technology
www.pajero4x4.ru:88/bbs/phpBB2/viewtopic.php?f=31&t=29927
its my foto album
fotki.yandex.ru/users/amatti73/?