|
Post by jkdv8 on Oct 3, 2015 23:04:01 GMT -5
Has anyone done or thought about doing a fog light mod where you can turn them on by themselves and/or use with the high beams. Would at least like to use them when the parking lights are on. To my understanding all that is needed is to bypass the fog light relay feed from the headlight circuit with either 12v+ or ground depending which it uses. Will have to look at the diagram.
Edit: or use the parking light circuit to feed where the headlight circuit feeds in. Would be nice to be able to run them regardless if the parking or headlights are on.
|
|
|
Post by pinstryper on Oct 4, 2015 10:54:21 GMT -5
I would pull a ignition hot lead and wire them with a dedicated switch. Use at your discretion
|
|
|
Post by jkdv8 on Oct 4, 2015 11:32:10 GMT -5
Might have to do that. I was hoping to keep it as stock as possible i.e. Using the factory switch, wiring etc.
|
|
|
Post by dirk on Oct 4, 2015 18:10:35 GMT -5
I installed an aftermarket set, and hate that they are not through a relay. I have left them on numerous times. Never killed my battery yet, but they are just low powered LEDs.
|
|