|
|
Post by GmiCooL on Mar 1, 2004 16:05:09 GMT -5
|
|
|
|
Post by remembertofocus on Mar 3, 2004 2:08:20 GMT -5
me too...step by step would be great...main worry is the camber...i have an 02' xls...
gmicool...what will 1/2-1 full coil drop it? (inches) i was thinking like 2 inches...also, lets see some pics of the new dubs...
|
|
|
|
Post by GmiCooL on Mar 5, 2004 10:46:48 GMT -5
I'm going tobe getting my freinds digital camera tonight, and I probably will at least have my monitor in. I'll get those pics of the Sport up as soon as I can  ............I figure 1 coil should drop it about 2 inches. That sounds about right to me. I think saturday we are going to just take a shot at dropping it, my friend the, "Automator," thinks he figured it out. So if it works, I'll make sure to send you some step by steps |
|
|
|
Post by remembertofocus on Mar 6, 2004 1:31:38 GMT -5
dude...you rock...where do u live? i can't wait to see it...good luck...take good "notes" MORE INFO THE BETTER...super excited!
adam
|
|
|
|
Post by mywifesls on Mar 6, 2004 17:05:04 GMT -5
Can't wait to see what pics you got! Been thinking about getting a new Sport. Had my eye on a 1999 2WD LS for $7800. At least, that's what I think it is. I do know that it's a 1999 with a 3.0 and 2WD. Prime street stock if ask me!
|
|
|
|
Post by sirlordoz on Mar 11, 2004 23:56:30 GMT -5
Ok guys,
I got my wheels and it so needs a dropp, but i think its going to need more that the lil 2 inch ill get from the coils and spring deal. so i checked it out, and the rear set up is easyer than i had thought about mounting a set of bags in. The top and bottom of the spring mounts are accesable so it looks like i can bolt the bag in, well after drilling a few holes. So thats a done deal! teh front is a lot different, i will have to remove the torsions and fab in the bag mount but agin it aint that bad. But i do have a question for the mitsu techs out there. My sport is a 2000 4x4, if i bag this i want to know if there is any problems that i may have with the drive line. From what i see it dont look like anything is in the way or anything but i want to see if u guys can think of anything!
Thanks
Lata
|
|
|
|
Post by sirlordoz on Mar 13, 2004 22:26:39 GMT -5
ok guys i looked around the sport again to day and saw a major set back! The rear swing arm is not far from the frame, and when dropped will hit i think! Well it will for what im doinf it shouldnt on a mild drop. But it may if u hit something real hard! I was wondering if any of u guys that have one dropped could get me a pic of this on yours so i can see how it is affected. Thanks all!
Lata
|
|
|
|
Post by GmiCooL on Mar 15, 2004 14:49:08 GMT -5
Whew got it dropped! Still am trying to get my hands on a digital camera from one of my freinds. It was a pretty easy job because we had it up on a lift. I also put on some new Rancho adjustable shocks so I could have a stiffer ride so it wouldn't bottom out. I brought it down about 2 inches so its looking a lot better. As soon as I can get my hands on a camera I'll be posting the pics.
|
|
|
|
Post by remembertofocus on Mar 15, 2004 17:02:09 GMT -5
great! yeh get picks...please post all your info, how u did, what we'll need, hows the drive, hows the camber, etc...excited!
|
|
|
|
Post by GmiCooL on Mar 19, 2004 9:09:25 GMT -5
The ride isn't that bad, its a little rougher than it was originally, but no big deal. I had to have the camber reset, but that wasn't really that bad either. Hopefully I can get some pics soon....and I will try to get some notes made up, to let everyone know how to drop it...Oh and I live in Tyrone, PA....Later  |
|
