|
Post by bigdaddy62486 on Oct 13, 2007 22:51:53 GMT -5
I have a stock 1997 MS LS with a regular bumper cover with two turn signals lights. I would like to add Fog Lights to the SUV. Is it possible? And can anyone explain how to do so? On top of that, can HID's be installed in them? I'm putting 8500k HID's in my headlights but are there any HID's for this SUV that have Hi's and Lo's and not just Lo's?
|
|
|
Post by cwic on Oct 15, 2007 17:19:19 GMT -5
u can get some silverstars for now till u work out the HID thing. they are a noticable improvement. Clay
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 16, 2007 16:42:15 GMT -5
check on Ebay, you can buy a pair of replacement fog lights for about 160 thats much better than pay about 300 for each OEM fog. Also check your local Mitsubishi dealer to but the fogs bezels and brackets thats are cheaps. Should look like mine.
|
|
|
Post by bigdaddy62486 on Oct 17, 2007 23:34:15 GMT -5
I agree about the sylvania silverstars. I already have a pair in the car already and I love the amount of light they produce. But I just wanna try something new with the truck and put some HID's in. Should look kool.
|
|
|
Post by bigdaddy62486 on Oct 17, 2007 23:37:14 GMT -5
[check on Ebay, you can buy a pair of replacement fog lights for about 160 thats much better than pay about 300 for each OEM fog. Also check your local Mitsubishi dealer to but the fogs bezels and brackets thats are cheaps. Should look like mine. ]
That sounds pretty good as well. But I don't have the cut-outs or the bumper that allows for the fogs to be placed there. As you show with your MS you have the same turn signal markers and the fogs. I only have the turn markers without the fogs. What do I do? Do I purchase a new bumper with the cut-outs? If so, where? If you have a link, can I get it? Or did you cut the holes out yourself and do the mounts? I am really interested in doing this. Do you know a place that does the work? Hope to ttys...Dave
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 18, 2007 13:05:56 GMT -5
Remove your MS front bumper and you will see that it have all the fog lights holdings taps and also have the round mark so you can cut the holes on the perfect spot. It is a piece of cake!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 18, 2007 14:34:49 GMT -5
Let me know if you need to OEM parts numbers. Check Ebay for replacement fog lights.
|
|
|
Post by bigdaddy62486 on Oct 24, 2007 23:02:44 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 29, 2007 15:03:32 GMT -5
I simply bought the original Control Switch and an universal fog light wiring kit at Pep Boys. A very easy installation. Somes Sports have pre wiring for the fogs.
|
|
|
Post by melvinscott on Jul 30, 2008 23:59:15 GMT -5
Yeah it is possible. My ride was same as yours. Read some article at Autopartswarehouse
regarding setting up your car. Hope I helped.
|
|