ms lifts

[97ms]

ok all i have been able to find for my 97 ms is a 2 in lift please help me i want to go around 6-8 inches maybe more i want to be in the air so all help you can give me would be greatly appretiated

[cwic]

if u look at 4x4wire there is a write up about a 4in lift with alot of parts that is an optoin for the sport in other countries. It runs around $1500 though.
Clay

[skidplate98]

You can do a custom body lift. See link below
body lift msport97.proboards6.com/index.cgi?board=off&action=display&n=1&thread=5104

Or the other in country possibility, is you can do a SAS. (Solid Axle Swap) see link below.
SAS skidplate4x4.tripod.com/stvrainandConeyFlats/pg7VrainRoadconeyflats.html

Them you have one out of country possibility. If you can get it. It's a real IFS 4" lift kit from Thailand. See link below.
Thailand lift msport97.proboards6.com/index.cgi?board=off&action=display&n=1&thread=5054

Hope that helps.

Skid

97ms said:

ok all i have been able to find for my 97 ms is a 2 in lift please help me i want to go around 6-8 inches maybe more i want to be in the air so all help you can give me would be greatly appretiated