|
Post by ericjmess on Dec 8, 2004 16:47:01 GMT -5
Just installed my amp under the passenger seat. 1- took out passenger seat and then took out the center console (8 screws total, pretty easy to do) 2- routed wires under carpet to back cargo area 3- routed neg. ground under carpet to passenger seat rear right bolt position 4- routed power wire through driver side gasket in firewall, then toward radio and then back under the carpet to the passenger seat. 5- routed power signal wire from amp under the carpet to the fuse box by the driver's side (connected to the Windshield Wiper Fuse 6- routed 2 pairs of speaker wire to the back of the radio under the carpet I connected my amp to the Rear Right speaker and Rear Left speaker using the diagram I found at www.installdr.com. I borrowed the image and made it available to you guys at this page (use the lower diagram, the colors don't match but the speaker pin designation is correct): homepages.nyu.edu/~ejm232/monterosport.pdfplease feel free to ask questions while its still fresh in my head. -- Eric
|
|