|
|
Post by texmirage on Mar 26, 2005 13:25:05 GMT -5
what is the most HP on a MS on this board? four our six cyl. I still haven't found one yet but i'm looking at a 2.4 MS to build.
I have years of experince of toying with dsm's so everything *SHOULD* cross over. My plan is turboing the 2.4 till it breaks then build a DOHC 2.4 motor. and put it in the MS. 300-350 shouldn't be a problem.
|
|
|
|
Post by cwic on Mar 28, 2005 13:56:37 GMT -5
right now I think it is mine (at least on this board)with 170hp and 205ft torque at the wheels. Check out the dyno results in this thread. I will be updating it shortly when my cams get here from ausy land (rpw).
Clay
|
|
Lumute
Junior Member
Posts: 47
|
Post by Lumute on Mar 29, 2005 20:46:41 GMT -5
aren't the stock specs 173hp for the 3.0 and 197hp for the 3.5?
|
|
|
|
Post by ScruffMcGruff on Mar 29, 2005 22:40:50 GMT -5
yes... but i dont know how much u actually get at the wheels with those two engines.. by the way.. your little icon thing, what movie is that from?
|
|
Lumute
Junior Member
Posts: 47
|
Post by Lumute on Mar 30, 2005 9:49:21 GMT -5
Wow... Cwic have a 3.5 and he says he have the record with 170hp after mods!!!! so the specs say 197hp and its actually what? like 140?? ??   Cwic, how did you measured your hp? do you know wich is the actual measure without mods? The image its from a computer game called "Gabriel Knight II: The Beast Within", pretty cool right?  I have it as my wallpaper also... |
|
|
|
Post by cwic on Apr 1, 2005 16:15:37 GMT -5
it was measured with dynojet model 248c dynameter. the only real mod I have done so far is the throttle bodie which gave me 7hp and tourque at the wheels. I dont think the intake and exhaust had much effect, but put together with everything else I have planned it should give me a substantial boost. I did not get a baseline before I did the exhaust and intake so O dont know what the stock at the wheels is but I am willing to help someone out if they have a 3.5 and want to get their STOCK 3.5 4wd dynoed.
Clay
|
|
|
|
Post by CerOf on Apr 1, 2005 19:32:59 GMT -5
keep in mind too that every dyno is going to be a bit different.
Manufactuer HP and Torque #s for the most part are gained under IDEAL circumstances, including proper alignment of the planets.
A few manufacturers under rate their vehicles, like VW.
|
|
|
|
Post by Spo on Apr 13, 2005 5:42:22 GMT -5
|
|
I have it as my wallpaper also...