|
Post by entreprenegro on Jul 17, 2006 9:04:43 GMT -5
2003 Montero Sport XLS 3.5L
I have a question about the Spectre intake mod. I found the Spectre Part I need (#8219). I have a question about the sensors connected to the stock Montero Sport Air Intake.
There is one sensor Closest to the engine that I could easily insert into the Spectre Tube.
There is a box directly connected to the Stock Air Box. I believe this box as sensor inside of it. If not It's of some type of importance, because there is a wire connected to it. What to I do with this box when Using the Spectre Intake Tube?
|
|
|
Post by entreprenegro on Jul 17, 2006 9:14:09 GMT -5
I'm going to anwser my own question.
After some more digging at the Spectre website I discovered what I'll need is the "Air Intake Mass Air Flow Sensor Adapter" Part No. 81403
|
|
|
Post by sirlordoz on Jul 17, 2006 17:54:23 GMT -5
yeah basicly all u need is the part that bolts up to the mass air folow sensor and the filter thats what i did with mine, i ordered it from injen. i dont kno wwhat else u have, but if its the tube after im intersted in getiing one myself! Oz
|
|
|
Post by LimitedOThree on Jul 18, 2006 8:12:09 GMT -5
an adapter plate will make it easy to put on a cone filter to the end of your MAS. works well. and it's quieter with the stock intake tubes with all the built-in baffles. see below. but if you want a little more custom, put on a new tube. sounds louder, looks better. see below. i am going to someday take the bend out. like this. bad photo work, but you get the idea. the cone filter, pipe and adapter plate i got off e-bay for a mits lancer. it had all the same parts. the tube i cut off about 8" to make it fit. easy.
|
|
|
Post by sirlordoz on Jul 18, 2006 22:18:42 GMT -5
thanx for the info on the tube i have so been wanting that it just dont growl enough with just tho cone! thanx bro! Oz
|
|
|
Post by msxls03 on Aug 31, 2006 18:48:21 GMT -5
did you have to reprogram the MAS since now there is a higher air to fuel ratio? or is the difference negligable between the stock and spectre intake?
|
|
|
Post by cwic on Sept 4, 2006 12:16:28 GMT -5
no the ecu will learn and adapt to the mod. clay
|
|
|
Post by bwimports on Jan 31, 2007 12:38:53 GMT -5
anyone got some pics of this mod? i'm thinking of doing it before the end of next week.
|
|
|
Post by cwic on Jan 31, 2007 15:15:03 GMT -5
i can e-mail them to u if u pm me ur adress. clay
|
|
|
Post by ronix on Jan 31, 2007 22:14:18 GMT -5
hey,clay! can you email me too the pix if you get the chance,thanx! 23ron@comcast.net
|
|
|
Post by cwic on Feb 5, 2007 18:00:40 GMT -5
yes
|
|
|
Post by cwic on Feb 6, 2007 8:56:42 GMT -5
sent
|
|
|
Post by bwimports on Feb 6, 2007 13:21:30 GMT -5
thanks
|
|
|
Post by ronix on Feb 6, 2007 20:06:14 GMT -5
got it! thanks! great pics too
|
|