|
Post by Sportsman on Feb 22, 2003 16:27:33 GMT -5
Matt,
I thought I read somewhere here, but can not find where you installed a ARB rear locker in your 2000 MS.
If so can you give me the Part or kit numbers needed.
Like also know how it working so far for you? any problems, or suggestions!
I have a 2000 MS with 1-1/2 torrsion bar lift and Airbags in the rear, superwinch manual hubs, 265x75x16 Dueler AT's
|
|
|
Post by matt00sport on Feb 24, 2003 16:13:03 GMT -5
ARB part #RD25 for the 3.0 with rear disc brakes. You will need a compressor as well. haven't been out in it yet to test it out- just installed a couple of days ago.
Only suggestions- get carrier bearings and inner axle seals to provide to the installer. Other than that, if for some reason they have to pull the pinion gear (if they don't get a good pattern on the gears once they drop the ARB unit back in) you will need pinion bearings/shims/crush sleeve/ and seal.
|
|