|
Post by justyn01 on Apr 21, 2011 14:11:11 GMT -5
none of the engine lights on instrument panel light up, turn signals don't work, tachometer and speedometer don't work, fuel pump doesn't prime up when switch is in run/on position, and coil packs don't fire when attempting to start vehicle. could the crank position sensor cause all of these to happen? If not, any suggestions on what it could be? anyone had this problem before?
|
|
|
Post by 45calmike on Jun 11, 2011 0:06:24 GMT -5
Start simple, do a fuse check at the fuse box below the dash on the driver side above the foot rest. Also check the fuse compartment in the engine next to the battery. You can do a visual or use a test light or fuse tester/multmeter
|
|