|
Post by dclambertt on Dec 3, 2015 14:47:42 GMT -5
It looks as if the intake would snap off from fatigue with that missing. Naw the plenum is quite solidly anchored to the engine.
|
|
|
Post by jkdv8 on Dec 3, 2015 23:01:38 GMT -5
Yea probably not. Just looks kinda sketch with half the intake hanging out there with no support.
|
|
|
Post by dclambertt on Dec 11, 2015 12:04:21 GMT -5
Just got my new plenum stay/engine hanger.. installing tonight. Should add 50 HP right?
|
|
|
Post by ES_97Sport on Dec 11, 2015 13:41:48 GMT -5
Just got my new plenum stay/engine hanger.. installing tonight. Should add 50 HP right? No, 50 HP is only the one for the 3000GT. The Montero Sport one only adds 15 HP. Edward
|
|
|
Post by dclambertt on Dec 11, 2015 14:41:45 GMT -5
Surprised if it didn't drop 15 HP.. that thing is LARGE.
|
|
|
Post by pinstryper on Dec 11, 2015 15:06:54 GMT -5
I have an ebay link for one carved from unobtanium. that guarantees to cost you
|
|
|
Post by ES_97Sport on Dec 11, 2015 17:44:45 GMT -5
Surprised if it didn't drop 15 HP.. that thing is LARGE. Yea, no doubt! I was looking at the one on my '97. Not small and not light. Edward
|
|
|
Post by dclambertt on Dec 11, 2015 18:25:12 GMT -5
Guess it needs to be fairly substantial if you're lifting an engine with it.
|
|
|
Post by redraif on Dec 13, 2015 22:07:14 GMT -5
Eureka i have it!!! And my tranny dipstick tube (handle oops) is broke off... ugh!!!
|
|
|
Post by pinstryper on Dec 13, 2015 23:20:14 GMT -5
The upper tube?
|
|
|
Post by redraif on Dec 13, 2015 23:24:37 GMT -5
Dipstick handle.... ugh! Typing and thinking too fast at the same time... duh!
|
|
|
Post by pinstryper on Dec 14, 2015 0:10:33 GMT -5
If you can't source it local let me know
|
|
|
Post by redraif on Dec 14, 2015 10:11:02 GMT -5
If you can't source it local let me know Will do! Thank you! If i can ever get to the yards.... been holding off till after christmas. The rescue cats we have have drained our accounts and savings this past 3 weeks. 2 had very bad crisises to the tune of $2200.00. Merry Christmas to us... lol!
|
|
|
Post by dclambertt on Dec 14, 2015 16:05:36 GMT -5
Dang that hanger was not an easy install! Very little room to get that beast into place to bolt it on. Had to unbolt several lines attached to the plenum to get that thing in place.
|
|